User`s manual

Signamax 065-1600 series Managed Media Converter
Publication date: October, 2005
Revision 1.0
105
Flow Control: Enabled, Disabled
Show each port’s flow control status. There are two types of flow control
in Ethernet, Backpressure for half-duplex operation and Pause flow
control (IEEE802.3x) for full-duplex operation. Signamax 065-1600
series supports both of them. When duplex mode is half duplex, there is
only one status “Enabled” for flow control. When in full duplex, it may be
one of “Enabled”, or “Disabled”. Default: Enabled
Media Type:
Only “UTP Cable” and “Fiber Cable” are in this model.
Connector:
Displays the connector type; for instance, UTP, SC, ST, LC, and so on.
Fiber Mode:
Displays the fiber mode; for instance, multimode, singlemode.
Fiber Cable:
Displays the cable type; for instance, Dual Wire, Single Wire.
Wavelength:
Displays the wavelength of the light transmitted in the fiber; for instance,
1310nm, 1550nm.
Max .Distance:
Displays the maximum distance the port supports; for instance, 100 m,
20 km, 40 km, and so on.
Speed:
Displays the maximum speed of the port, for instance, “1G”, “100M”.