User`s guide

Signamax Connectivity System 065-7708, 065-7728, 065-7764
www.signamax-us.com www.signamax-eu.com
2.5.2 QOS Configuration
QoS settings allow customization of packet priority in order to facilitate delivery of data
traffic that might be affected by latency problems. The IEEE 802.1p Priority
specification uses 8 priority levels to classify data packets. In 802.1p compliant
devices, a tag inserted into the packet header is used to identify the priority level of
data packets.
The Switch supports four kinds of Traffic classifiers: 802.1P/ Port/MAC/VLANs and
four queues.
NOTE:
COS: priority classifiers of the Switch forward packet. COS range is from 0 to 7.
Seven is the high class. Zero is the less class. The user may configure the
mapping between COS and Traffic classifiers.
1. MAC-COS
QoS settings allow customization of MAC address to Traffic classifiers.
In the field input MAC Address. Input you want to mapping COS number.
To delete an entry from the table, simply select it and click Delete.
Figure 2-56
Figure 2-57