User`s guide

Signamax Connectivity System 065-7708, 065-7728, 065-7764
www.signamax-us.com www.signamax-eu.com
 Auto: enables 802.1X authentication and causes the port to begin in the
unauthorized state, allowing only EAPOL frames to be sent and received through
the port. It’s a default status
 Force authorized: disables 802.1X authentication and causes the port to transition
to the authorized state without any authentication exchange required. The port
transmits and receives normal traffic without 802.1X-based authentication of the
client. This is the default setting.
 Force unauthorized: causes the port to remain in the unauthorized state, ignoring
all attempts by the client to authenticate. The switch cannot provide authentication
services to the client through the interface.
 Maximum account number: the biggest user's quantity of passing authentication
under this port, set 1，Only one user can pass this authentication，The second
user is unable to carry on authentication on this port。The max value is 32
 Current account number: show the current user who passed authentication under
one port.
2. Enter”802.1X Local Authenticate” to set legitimate user information: In the
local server model, the need for each port through the establishment of the
legitimate user authentication information available. As Figure2-45