User`s guide

Signamax Connectivity System 065-7708, 065-7728, 065-7764
www.signamax-us.com www.signamax-eu.com
Figure1-2 Login
NOTE:
The factory-default User name is empty. Pass word is “password”
After entering the password, you can access main page of your switch.
1.2 Console Management
A local console is a terminal or a workstation running a terminal emulation program
that is connected directly to the switch via the RS-232 console port on the rear of the
switch. Local console management uses the terminal connection to operate the
console program built-in to the Switch a network Administrator can manage, control
and monitor the switch from the console program.
To start using the Console Management program, first connect an EIA-232 serial
cable to a COM port on a PC or notebook computer and to the Console Port on the
rear panel of the Switch. Note: do not use a null modem cable.
If you are using Microsoft Windows, boot up the computer, go to “Start” -“Programs”-
“Accessories”, -“Communications”, and open the “HyperTerminal”. After that follow the
instructions below to setup a new terminal connection for the Switch. If you are using
other communication software, please select the correct COM port and setup the
connection properties according to step 3 below.