User`s guide

Signamax Connectivity System 065-7708, 065-7728, 065-7764
www.signamax-us.com www.signamax-eu.com
1 Management
This chapter describes three management methods of the Switch.
 Web-based management
 Console management
 Telnet management
 SNMP provides v1/v2
1.1 Web-based management
The Switch has a Web GUI interface for switch configuration. The Switch can be
configured through the Web browser. A network administrator can manage, control,
and monitor the Switch from the local LAN. This section indicates how to configure the
Switch to enable its smart functions including:
Before you configure this device, note that when the Switch is configured through an
Ethernet connection, the manager PC must be set on the same the IP network. For
example, when the default network address of the default IP address of the Switch is
192.168.2.11, then the manager PC should be set at 192.168.2.x (where x is a
number between 1 and 254 except 11), and the default subnet mask is 255.255.255.0.
Open an Internet Explorer 5.0 or above Web browser.
Enter the IP address http://192.168.2.11 (the factory-default IP address setting) in the
address location.