User`s guide

Signamax Connectivity System 065-7708, 065-7728, 065-7764
www.signamax-us.com www.signamax-eu.com
2.2 Port Management
2.2.1 Port Configuration
This page displays the current status of every port. It will display the user’s selection
for each port followed by the actual discovered settings.
 Management Status: Display port status: Enable or Disable, Disable indicates port
is off.
 Link Status: Down indicates “No Link”, up indicates “Link”.
 Speed: Used to set the port speed to either 100Mbps or 10Mbps on Port1~Port48.
 Duplex: Displays full-duplex or half-duplex mode.
 Flow Control: Display Flow status of port: Enable or Disable, Disable indicates
Flow control is off.
 Auto: Display which mode the port is auto-negotiated
 Config: (configured) Displays the state defined by the user.
 Atual: (actual) Displays the negotiation result.
Figure 2-17
2.2.2 Port Statistics
The Port Statistics page provides a view of the current status of every port on the
Switch.
Pressing the “Reset” button will reset all port counters to zero.
2.2.3 Port Band Restrict
The function provides for the administrator In-Band Restrict and Out-Band Restrict of
every port on the Switch. Input the range from 64Kbps to 8000Kbps.