User's Manual

Remark:
1) Through USB connection the client is not included in the total access users.
2) If the system does not support automatic installation, please run the Driver Setup. exe
program in My Computer> CD-ROM drive to start software installation.
3) After the software installs the CD-ROM drive successfully, the device driver will be installed
successfully at the same time. Afterwards,the device manager will show:
3.2 Via Wi-Fi
3.2.1 Password access
The following is an example with basic steps.
1) Turn on the device, wait for 1~2 minutes till the device initiali-zation is completed.
2) Please configure the computer.
Steps to configuration Wi-Fi is as follows:
a) Click Start, and then click Control Panel.
b) Click Network and Internet, then click”View your basic
network information” and set up connections.
c) Right-click on Local Connection, choose Properties.