User's Manual

Remark:
1) About the client WPS process operation, please refer to the client’s instructions.
2) WPS function will automatically shut down after 2 minutes, if you need a connection to be
established through the WPS, please press the WPS button again.
3.3 How to obtain the SSID and password
The SSID and password of the devices will be posted on the lable as normal, if not you can obtain
the SSID and password through the way as bellow.
1) Obtain via Web
Enter to the Web UI, Enter to settings WLAN settings -- Basic settings, you will see the
information of SSID and KEY.
2) Double click the WPS Button
3) Double click the device WPS Button, you can see the information of SSID and KEY on the LCD.
Section 4 - Managing the Web UI page
Web UI management interface can help users to manage the device effecticely.
This chapter will show you how to manage the page.
4.1 Login
1) Enable the connection between Client Terminal and device.
2) Start the browser, Enter http://192.168.0.1 into the web page in the address bar.
3) In the subsequent pop-up login window, enter the default password”admin”, click Login, you
can enter the Web UI management page.
Remark: you are advised to use the following browsers: IE (7.0 or higher), Firefox (3.0 or higher),
Opera (10.0 or higher), Safari (4.0 or higher) or Chrome (5.0 or higher),
4.2 Web UI Introduction