User Manual

4/18/2011 Page 7 of 8
SignalFire Telemetry - Rev 5.0
Modbus-in-a-Stick Serial Configuration and Debug Commands
The following table contains a list of useful configuration and debug commands that can
be issued over the RS-232 connection from a standard terminal program such as Putty.
Command Description
radio network X
Sets the radio network to X. Generally from 16 to 23.
checkin
Causes the node to read the modbus device and forward the data
to the gateway
radio show
Displays current radio configuration information
radio reset
Forces a radio reset
reboot
Forces a system reboot
info
Displays the current firmware versions
scan
Starts an automatic Modbus ID scan
scan show
Displays list of discovered Modbus slave ID’s