User's Manual

4
Connections and Components
Radio LEDs
- The Radio TX LED (green) flashes each time a radio packet is sent. This LED will blink rapidly
while searching for the radio network.
- The Radio RX LED (red) blinks on each received radio packet.
Status LEDs
- The STATUS LED (green) Currently not implemented – for future use.
- The ERROR LED (red) will blink to indicate an error condition.
Checkin Button
- If this button is pressed the Flow Totalizer will perform a check-in and send the current
readings to the gateway.
SignalFire Telemetry
Rev 2.4