User's Manual

14
Configuration / Debug
WARNING: Only connect to the debug port in a safe area! Ensure that the
maximum voltage applied to the configuration port is less than 5 VDC!
AVERTISSEMENT: Branchez le port de déboggage que dans une zone secure.
Assurez-vous que la tension électrique sur le port de configuration soit moins de 5
volt DC.
Debug and configuration information is available if a connection is made via the debug port on the
main board. A USB converter cable (available from SignalFire) must be used for this interface.
Debug and configuration is done using the SignalFire Toolkit PC application.
Technical Support and Contact Information
SignalFire Telemetry
43 Broad St C-300
Hudson, MA 01752
[phone]
[e-mail]
Revision History
Revision
Date
Changes/Updates
1.0
6/26/17
Initial release
2.0
7/11/17
Added units info, updated ToolKit screenshot
2.1
7/17/17
Minor edits
2.2
8/8/17
Added battery life table, added detail on LCD always on setting
2.3
8/15/17
Updated warnings
2.4
8/28/17
Added FCC/IC details
SignalFire Telemetry
Rev 2.4
SignalFire Telemetry