Specifications

This model of seat shall have successfully completed the static load tests by FMVSS 207/210. This
testing shall include a simultaneous forward load of 3000 pounds each on the lap and shoulder belts and
twenty (20) times the weight through the center of gravity. This model of seat installed in the cab
model, as specified, shall have successfully completed the dynamic sled testing using FMVSS 208 as a
guide with the following accommodations. In order to reflect the larger size outfitted firefighters, the
test dummy used shall be a 95th percentile hybrid III male weighing 225 pounds rather than the 50th
percentile male dummy weighing 165 pounds as referenced in FMVSS 208. The model of seats shall
also have successfully completed the flammability of materials used in the occupant compartments of
motor vehicles as outlined in FMVSS 302, of which decides the burning rate of materials in the
occupant compartments of motor vehicles.
SEAT BACK REAR FACING OUTER
The rear facing outer seat back(s) shall include a Ziamatic brand model QM-EZL-F mechanical
self-contained breathing apparatus (SCBA) bracket. The Mechanical walk away bracket shall meet
NFPA 1901-09 9G dynamic requirements for cylinder restraint systems for use in crew compartments of
fire truck cabs.
The bracket shall secure a self-contained breathing apparatus with most sizes of cylinders. The bracket
shall feature a top clamp and a footplate which securely lock the SCBA. The top clamp shall be PVC
coated to prevent damage to the cylinder. The steel back plate and cast aluminum footplate shall be
powder coated. The bracket shall also include a pull release cable with a handle which activates the lever
on the bracket saving the occupant from reaching behind the SCBA in order to release the bracket. The
handle shall be located on the front of the seat in the center.
The seat back shall include a removable padded cover which shall be provided over the SCBA cavity.
SEAT MOUNTING REAR FACING OUTER
The rear facing outer seat shall be mounted facing the rear of the cab.
SEAT FORWARD FACING CENTER LOCATION
The crew area shall include two (2) forward facing center crew seats with both located at the center of
the rear wall.
SEAT CREW FORWARD FACING CENTER
The crew area shall include a seat in the forward facing center position which shall be a Seats Inc. 911
Battalion series. The seat shall feature a tapered and padded seat, and cushion. The seat and cushion
shall be hinged and compact in design for additional room and shall remain in the stored position until
occupied.