Specifications

The officer seat back shall include a Ziamatic brand model QM-EZL-F mechanical self-contained
breathing apparatus (SCBA) bracket. The Mechanical walk away bracket shall meet NFPA 1901-09
9G dynamic requirements for cylinder restraint systems for use in crew compartments of fire truck cabs.
The bracket shall secure a self-contained breathing apparatus with most sizes of cylinders. The bracket
shall feature a top clamp and a footplate which securely lock the SCBA. The top clamp shall be PVC
coated to prevent damage to the cylinder. The steel back plate and cast aluminum footplate shall be
powder coated. The bracket shall also include a pull release cable with a handle which activates the lever
on the bracket saving the occupant from reaching behind the SCBA in order to release the bracket. The
handle shall be located on the front of the seat in the center.
The seat back shall include a removable padded cover which shall be provided over the SCBA cavity.
SEAT MOUNTING OFFICER
The officer’s seat shall be installed in an ergonomic position in relation to the cab dash.
SEAT BELT ORIENTATION CREW
The crew position seat belts shall follow the standard orientation which extends from the outboard
shoulder extending to the inboard hip.
SEAT REAR FACING OUTER LOCATION
The crew area shall include two (2) rear facing crew seats, which include one (1) located directly behind
the left side front seat and one (1) located directly behind the right side front seat.
SEAT CREW REAR FACING OUTER
The crew area shall include a seat in the rear facing outboard position which shall be a Seats Inc.
Battalion series. The seat shall feature a tapered and padded seat, and cushion. The seat and cushion
shall be hinged and compact in design for additional room and shall remain in the stored position until
occupied.
The seat shall feature an all belts to seat (ABTS) style of safety restraint. The ABTS feature shall
include a three-point shoulder harness with the lap belt and automatic retractor as an integral part of the
seat assembly. The buckle portion of the seat belt shall extend from the seat base towards the driver
position within easy reach of the occupant.
The minimum vertical dimension from the seat H-point to the ceiling for each belted seating position
shall be 35.00 inches.