Specifications

INTERIOR GRAB HANDLE FRONT DOOR
Each front door shall include one (1) ergonomically contoured 9.00 inch cast aluminum handle mounted
horizontally on the interior door panels. The handles shall feature a textured black powder coat finish
to assist personnel entering and exiting the cab.
INTERIOR GRAB HANDLE REAR DOOR
A black powder coated cast aluminum assist handle shall be provided on the inside of each rear crew
door. A 30.00 inch long handle shall extend horizontally the width of the window just above the window
sill. The handle shall assist personnel in exiting and entering the cab.
INTERIOR SOFT TRIM COLOR
The cab interior soft trim surfaces shall be gray in color.
INTERIOR TRIM SUNVISOR
The header shall include two (2) sun visors, one each side forward of the driver and officer seating
positions above the windshield. Each sun visor shall be constructed of Masonite and covered with
padded vinyl trim.
INTERIOR FLOOR MAT COLOR
The cab interior floor mat shall be black in color.
CAB PAINT INTERIOR DOOR TRIM
The inner door panel surfaces shall be painted with Zolatone #20-71 onyx black texture finish.
HEADER TRIM INTERIOR PAINT
The metal surfaces in the header area shall be coated with Zolatone #20-71 onyx black texture finish.
TRIM CENTER DASH INTERIOR PAINT
The entire center dash shall be coated with Zolatone #20-71 onyx black texture finish. Any accessory
pods attached to the dash shall also be painted this color.
TRIM LEFT HAND DASH INTERIOR PAINT