Specifications

CAB PAINT MANUFACTURER
The cab shall be painted with PPG Industries paint.
CAB PAINT PRIMARY/LOWER COLOR
The lower paint color shall be PPG FBCH 71096 ALT Red.
CAB PAINT SECONDARY/UPPER COLOR
The secondary/upper paint color shall be PPG FBCH 2185 white.
CAB PAINT EXTERIOR BREAKLINE
The upper and lower paint shall meet at a breakline on the cab which shall be located approximately
0.50 inch below the cab door windows on each side of the cab. The breakline shall curve downward at
the front cab corners to approximately 6.50 inches below the windshields on the front of the cab ending
at either side of the upper grille.
CAB PAINT PINSTRIPE
A 0.50 inch wide gold reflective tape with black borders shall be applied on the break line between the
two different colored surfaces.
CAB PAINT WARRANTY
The cab and chassis shall be covered by a limited manufacturer paint warranty which shall be in effect
for ten (10) years from the first owner’s date of purchase or in service or the first 100,000 actual miles,
whichever occurs first.
CAB PAINT INTERIOR
The visible interior cab structure surfaces shall be painted with a Zolatone #20-71 onyx black texture
finish.
CAB ENTRY DOORS
The cab shall include four (4) entry doors, two (2) front doors and two (2) crew doors designed for ease
of entering and egress when outfitted with an SCBA. The doors shall be constructed of extruded
aluminum with a nominal thickness of 0.13 inch. The exterior skins shall be constructed of 0.13 inch
aluminum plate.