Specifications

Smeal Pumper Demo # 4276
Page 6 of 58
 Rollup doors will be shown in open position. Lap doors will be shown in the closed position

 Compartment depth break over measurement. The measurement where the compartment
switches from full depth to shallow depth

 Angle of approach and departure
 Top view of chassis
Text Block Items
 Chassis model
 Water tank capacity
 Foam tank capacity
 Hose bed capacity in cubic feet
 Total compartment cubic feet 
 Drawing box is to read "BID" and utilize the bid number
 Drawings shall be printed on white paper with black ink; blue line drawings shall not be
acceptable.
PURCHASER'S OBLIGATIONS
The purchaser reserves the right to accept or reject any or all bids on such basis as the purchaser deems
to be in its best interest. All bidders shall be advised that the purchaser is not bound in any manner to
automatically accept the lowest bid. The purchaser shall only be obligated to purchase the lowest bid that
meets these detailed specifications as closely as possible.

SAFETY REQUIREMENTS
It is required that the bidder shall meet all State and Federal safety standards and laws that are in effect
on the date of the bid for the item(s) that are being specified and the particular use for which they are
meant.

ACQUAINTANCE WITH SPECIFICATIONS
It is the responsibility of the bidder to review all of the bidding requirements. Failure of a bidder to be
acquainted with this information shall not relieve them from any obligations of the bid requirements.

QUALITY AND WORKMANSHIP
The design of the apparatus shall embody the latest approved automotive engineering practices.
Experimental designs and methods shall not be acceptable.

The workmanship shall be of the highest quality in its respective field. Special consideration shall be
given to the following points: accessibility of the various units that require periodic maintenance, ease of
operation (including both pumping and driving), and symmetrical proportions.
