Specifications

Smeal Pumper Demo # 4276
Page 58 of 58
RUB RAIL REFLECTIVE STRIPING

There shall be 2" reflective striping installed in the rub rail channel. The reflective striping shall be
diamond grade quality material for increased visibility. The reflective shall be silver in color.

CHASSIS SUPPLIED PAINT BREAK STRIPING
The 1/2" gold reflective striping on the paint break line shall be supplied and installed by the chassis
manufacturer.

CAB DOOR REFLECTIVE STRIPING
The reflective striping on the inside of the chassis door shall be provided by the chassis manufacturer.
CHEVRON REFLECTIVE STRIPING ON REAR
In addition to the custom striping pattern supplied on the apparatus, there shall be additional reflective
striping applied to the entire rear of the unit. The reflective striping shall cover at least 50% of the rear
facing vertical surface per NFPA 1901. The striping shall consist of alternating reflective stripes. Each
stripe shall be a minimum of 6" in width and shall be applied to the apparatus at 45° angle.

The T1 Compartment and any storage compartment doors shall be excluded from the chevron pattern.
CHEVRON REFLECTIVE STRIPING, RED/FLUORESCENT YELLOW-GREEN
The chevron striping shall consist of 3M part numbers 1172 EC, red and 3983, fluorescent yellow-green.
Only 3M Diamond Grade™ VIP Reflective Striping shall be used. 3M Diamond Grade™ VIP Reflective
Striping is a wide angle prismatic lens reflective sheeting designed for the production of durable traffic
control signs and delineators that are exposed vertically in service. This sheeting is designed to provide
higher sign brightness than sheetings that use glass bead lenses. It is intended to also provide high sign
brightness in the legibility distance where other sheetings do not.

GOLD LEAF LETTERING
There shall be sixty (60) 22KT gold leaf letters provided and installed on the apparatus. The letters shall
be approximately 3" tall with black outline and shadow.
