Specifications

Smeal Pumper Demo # 4276
Page 57 of 58
LINE-X® THERMOPLASTIC COATING

In designated areas, Line-X® XS-350, a two component spray-in-place thermoplastic polyurethane
system shall be used for maximum protection of the body and equipment. Line-X® XS-350 is a 100%
high performance aromatic solids pure polyuria elastomeric membrane. The coating shall be a fast cure,
textured surface, multi-purpose material designed for commercial and industrial applications. It shall
exhibit excellent adhesion to the body and serve as a protective, abrasion resistant liner where applied.

The coating shall exhibit the following minimum typical physical properties:
 Tensile strength - 3,432 PSI (ASTM D-412)
 Elongation - 162% (ASTM D-412)
 Tear Strength - 783 PLI (ASTM D-624)
 Shore D Hardness - 60 +/-1 (ASTM D-2240)
TOUCH UP PAINT
One (1) two ounce bottle of acrylic enamel touch-up paint or two (2) touch up paint pens, if color is
available, shall be supplied.

CORROSION PREVENTION
One (1) 3.75 ounce tube of Electrolysis Corrosion Kontrol (ECK) shall be provided to use whenever
additional items are mounted to the apparatus.

ECK protects aluminum and stainless steel against electrolytic reaction, isolates dissimilar metals and
gives bedding protection for hardware and fasteners. ECK contains anti-seizing lubricant for threads. ECK
is dielectric and perfect for use with electrical connectors.

NFPA COMPLIANT REFLECTIVE STRIPING
Reflective striping shall be applied to the exterior of the apparatus in a manner consistent with NFPA
1901. It shall consist of a 1", 4", and a 1" wide stripe low across the front of the chassis and along the
sides up to the first compartment on each side where it shall angle up and back to a point in the upper
compartments where it shall then run level to the back edge of the body. There be a 1" gap provided
between each of the stripes.

REFLECTIVE STRIPE FRONT TERMINATION
The NFPA reflective stripe located on the side of the apparatus shall wrap around the front of the chassis
cab and terminate at chassis grill.

The color of the upper reflective striping on the apparatus shall be white.
The color of the main reflective striping on the apparatus shall be white.
The color of the lower reflective striping on the apparatus shall be white.