Specifications

Smeal Pumper Demo # 4276
Page 46 of 58
One (1), Alco-Lite model FL-10 folding aluminum ladder shall be provided. The ladder shall be equipped
with heavy cast aluminum swivel safety shoes and carrying handles. The closed dimensions of the ladder
shall be 11' 5" long x 5.25" wide. The ladder shall include a heat sensor label to warn if the ladder has
been exposed to excessive heat.

One (1), Alco-Lite model PRL-14, 14' aluminum roof ladder shall be provided. The ladder shall be
equipped with high strength steel rotating roof hooks with reinforcing brace and steel butt spurs and
rounded aluminum top caps for increased durability. The ladder shall include a heat sensor label to warn
if the ladder has been exposed to excessive heat.

One (1), Alco-Lite model PEL-24, 24' two section aluminum ladder shall be provided. The ladder shall be
equipped with steel butt spurs and rounded aluminum top caps for increased durability, and an oversized
2 1/4" pulley for ease of operation. The ladder shall include a heat sensor label to warn if the ladder has
been exposed to excessive heat.

PIKE POLE STORAGE
There shall be two (2) aluminum tubes for the storage of pike poles installed in the ground ladder storage
compartment.

The following pike poles shall be supplied with the apparatus:
One (1), Akron Brass model UL-6, 6' fiberglass pike pole shall be provided. The light weight heavy duty
pole shall be constructed of one and one quarter inch round fiberglass with a rubber bumper butt style
handle.

One (1), Akron Brass model UL-8, 8' fiberglass pike pole shall be provided. The light weight heavy duty
pole shall be constructed of one and one quarter inch round fiberglass with a rubber bumper butt style
handle.

HARD SUCTION HOSE RACK WITH PIKE POLE STORAGE
There shall be a hard suction hose rack above the side compartments. Capacity shall be provided to
store two (2) sections of 10' hard suction hose. Additionally, storage for two pike poles shall be provided
on the rack.

The suction hose storage shall be located above the right side compartments.
HARD SUCTION HOSE, FIREQUIP
There shall be two (2), Firequip Maxi-Flex PVC 6” x 10’ sections of hard suction hose provided. 
WHEEL CHOCKS
There shall be one (1) pair of Cast Products model TMC1008-4 wheel chocks provided with the
apparatus. The wheel chocks shall be mounted in Cast Products model TMC 1010 mounting brackets.

The wheel chocks shall be stored in locations that are easily accessible under the front of the body on the
left side of the apparatus.
