Specifications

Smeal Pumper Demo # 4276

Page 3 of 58

7. Weight documents from a certified scale showing actual loading on the front axle, rear axle(s), and

overall fire apparatus (with the water tank full but without personnel, equipment, and hose)



8. Written load analysis and results of the electrical system performance tests 

9. When the apparatus is equipped with a water tank, the certification of water tank capacity

OPERATION AND SERVICE DOCUMENTATION

The contractor shall supply, at time of delivery, at least two (2) sets of complete operation and service

documentation covering the completed apparatus as delivered and accepted. The documentation shall

address at least the inspection, service, and operations of the fire apparatus and all major components

thereof. The contractor shall also provide documentation of the following items for the entire apparatus

and each major operating system or major component of the apparatus:



 Manufacturers name and address

 Country of manufacturer

 Source of service and technical information

 Parts and replacement information

 Descriptions, specifications, and ratings of the chassis, pump, and aerial device 

 Wiring diagrams for low voltage and line voltage systems to include the following information:

representations of circuit logic for all electrical components and wiring, circuit identification,

connector pin identification, zone location of electrical components, safety interlocks, alternator-

battery power distribution circuits, and input/output assignment sheets or equivalent circuit logic

implemented in multiplexing systems



 Lubrication charts 

 Operating instructions for the chassis, any major components such as a pump or aerial device,

and any auxiliary systems



 Precautions related to multiple configurations of aerial devices, if applicable 

 Instructions regarding the frequency and procedure for recommended maintenance 

 Overall apparatus operating instructions 

 Safety considerations 

 Limitations of use 

 Inspection procedures 

 Recommended service procedures 

 Troubleshooting guide 

 Apparatus body, chassis, and other component manufacturers warranties 