Specifications

Smeal Pumper Demo # 4276
Page 21 of 58
The valve shall be actuated by an Akron Brass model TSC manual actuator installed directly on the valve.
The handle shall allow the valve to be controlled directly at the valve.

There shall be a Trident Emergency Products 3/4" quarter-turn drain valve included. There shall be a
chrome plated rectangular handle provided on the drain valve to facilitate use with a gloved hand. The
drain valve shall be located just above the running board and below the pump panel to reduce clutter in
the pump panel area. The drain valve shall be connected to the valve with flexible hose that is routed in
such a manner as to assure complete drainage to below the apparatus. A matching color coded bezel
shall be included.

The intake shall terminate FNST thread.
There shall be one (1) Trident model 01.007.0, 2 1/2" NST plug with chain provided. The plug shall have
a chrome finish.

There shall be a two (2) piece permanent plate installed that includes a verbiage tag and a black color
coded bezel. The verbiage tag shall be etched on aluminum and have 3M-468 adhesive applied to the
back for assembly into the bezel. The bezel shall be die cast aluminum construction and color coded on
all visible surfaces with an automotive grade paint. 3M VHB adhesive shall be applied to the back.

2-1/2" LEFT SIDE DISCHARGE
There shall be a 2-1/2" discharge, with 2-1/2" plumbing, located on the left side of the pump module.
An Akron Brass model 8625 2-1/2" Swing-Out™ valve shall be provided. The valve shall have an all
brass body with flow optimizing stainless steel ball and dual polymer seats. The valve shall be capable of
dual directional flow while incorporating a specially designed flow optimizing stainless steel ball. The
valve shall not require lubrication of seats or any other internal waterway parts, and must be capable of
swinging out of the waterway for maintenance by the removal of six bolts. The valve shall be
manufactured and assembled in the United States. The valve shall carry a ten (10) year warranty by the
valve manufacturer.

The valve shall be actuated by an Akron Brass rack and sector actuator installed on the valve.
The rack and sector actuator shall be controlled by a Trident push/pull T-handle. The handle shall be
chrome plated with a recessed ID label.

There shall be a Trident Emergency Products 3/4" quarter-turn drain valve included. There shall be a
chrome plated rectangular handle provided on the drain valve to facilitate use with a gloved hand. The
drain valve shall be located just above the running board and below the pump panel to reduce clutter in
the pump panel area. The drain valve shall be connected to the valve with flexible hose that is routed in
such a manner as to assure complete drainage to below the apparatus. A matching color coded bezel
shall be included.

There shall be a Thuemling 2-1/2" water pressure gauge installed. The pressure gauge shall read
pressure in PSI and shall be capable of reading 0-400 PSI. The gauge shall be fully filled with pulse and
vibration dampening liquid to insure proper operations to minus 40 degrees and to reduce lens
condensation. A removable polished, stainless steel trim ring shall be provided with the gauge.
