Specifications
Smeal Pumper Demo # 4276
Page 2 of 58
Rear tire size and total rated capacity in pounds or kilograms
Chassis weight distribution in pounds with water and manufacturer mounted equipment (front and
rear)
Engine make, model, serial number, rated horsepower and related speed, and governed speed
Type of fuel and fuel tank capacity
Electrical system voltage and alternator output in amps
Battery make, model, and capacity in cold cranking amps (CCA)
Chassis transmission make, model, and serial number; and if so equipped, chassis transmission
PTO(s) make, model, and gear ratio
If applicable, the pump make, model, rated capacity in gallons or liters per minute, and serial
number
Pump transmission make, model, serial number, and gear ratio, if unit is equipped with a pump
If applicable, the auxiliary pump make, model, rated capacity in gallons or liters per minute, and
serial number
Water tank certified capacity in gallons or liters
On aerial apparatus, the device type, rated vertical height in feet or meters, rated horizontal reach
in feet or meters, and rated capacity in pounds or kilograms
Paint manufacturer and paint number(s)
Company name and signature of responsible company representative
2. Certification of slip resistance of all stepping, standing, and walking surfaces
3. If the apparatus has a fire pump, a copy of the following shall be provided: pump manufacturers
certification of suction capability, apparatus manufacturers approval for stationary pumping applications,
engine manufacturers certified brake horsepower curve showing the maximum governed speed, pump
manufacturers certification of the hydrostatic test, and the certification of inspection and test for the fire
pump
4. If the apparatus has an aerial device, the certification of inspection and test for the aerial device, and all
the technical information required for inspections to comply with NFPA 1914, Standard for Testing Fire
Department Aerial Devices
5. If the apparatus has a fixed line voltage power source, the certification of the test for the fixed power
source
6. If the apparatus is equipped with an air system, test results of the air quality, the SCBA fill station, and
the air system installation










