Specifications

Smeal Pumper Demo # 4276
Page 19 of 58
There shall be a two (2) piece permanent plate installed that includes a verbiage tag and a black color
coded bezel. The verbiage tag shall be etched on aluminum and have 3M-468 adhesive applied to the
back for assembly into the bezel. The bezel shall be die cast aluminum construction and color coded on
all visible surfaces with an automotive grade paint. 3M VHB adhesive shall be applied to the back.

2" TANK FILL
There shall be a 2" tank fill plumbed from the pump to the tank. Installation shall be completed with 2"
Class 1 rubber hose and stainless steel hose couplings.

An Akron Brass model 8820 2" Swing-Out™ valve shall be provided. The valve shall have an all brass
body with flow optimizing stainless steel ball and dual polymer seats. The valve shall be capable of dual
directional flow while incorporating a self-locking ball feature using an automatic friction lock design and
specially designed flow optimizing stainless steel ball. The valve shall not require lubrication of seats or
any other internal waterway parts, and must be capable of swinging out of the waterway for maintenance
by the removal of six bolts. The valve shall carry a ten (10) year warranty by the valve manufacturer.

The valve shall be actuated by an Akron Brass model R1 manual actuator installed on the valve.
The manual actuator shall be controlled by a Trident push/pull T-handle. The handle shall be chrome
plated with a recessed ID label.

There shall be a two (2) piece permanent plate installed that includes a verbiage tag and a black color
coded bezel. The verbiage tag shall be etched on aluminum and have 3M-468 adhesive applied to the
back for assembly into the bezel. The bezel shall be die cast aluminum construction and color coded on
all visible surfaces with an automotive grade paint. 3M VHB adhesive shall be applied to the back.

6" LEFT SIDE STEAMER INLET
There shall be a 6" steamer inlet located on the left side of the pump module. The suction fittings shall
include a removable die-cast screen to provide cathodic protection for the pump thus reducing corrosion.

A short steamer barrel shall be installed to accommodate an intake valve without exceeding the legal
overall body width.

The intake shall terminate MNST thread.
There shall be one (1) Trident model 01.003.9, 6" NST vented long handle steamer cap provided. The
cap shall have a chrome finish.

There shall be a two (2) piece permanent plate installed that includes a verbiage tag and a chrome color
coded bezel. The verbiage tag shall be etched on aluminum and have 3M-468 adhesive applied to the
back for assembly into the bezel. The bezel shall be die cast aluminum construction and color coded on
all visible surfaces with an automotive grade paint. 3M VHB adhesive shall be applied to the back.

6" RIGHT SIDE STEAMER INLET
There shall be a 6" steamer inlet located on the right side of the pump module. The suction fittings shall
include a removable die-cast screen to provide cathodic protection for the pump thus reducing corrosion.
