Specifications

DO NOT MOVE APPARATUS LIGHT
The front headliner of the cab shall include a flashing red light clearly labeled "Do Not Move
Apparatus". In addition to the flashing red light, an audible alarm shall be included which shall sound
while the light is activated.
The flashing red light shall be 6.00 inches long X 2.50 inches wide X 1.75 inches high and shall be
located centered left to right for greatest visibility.
The light and alarm shall be interlocked for activation when either a cab door is not firmly closed or an
apparatus compartment door is not closed, and the parking brake is released.
MASTER WARNING SWITCH
A master switch shall be included in the main rocker switch panel. The switch shall be a rocker type,
red in color and labeled “Master” for identification. The switch shall feature control over all devices
wired through it. Any warning device switch left in the “ON” position shall automatically power up
when the master switch is activated.
HEADLIGHT FLASHER
An alternating high beam headlight flashing system shall be installed into the high beam headlight
circuit which shall allow the high beams to flash alternately from left to right.
Deliberate operator selection of high beams will override the flashing function until low beams are again
selected. Per NFPA, these clear flashing lights will also be disabled “On Scene” when the park brake is
applied.
HEADLIGHT FLASHER SWITCH
The flashing headlights shall be activated through a rocker switch on the switch panel. The rocker
switch shall be clearly labeled for identification.
INBOARD FRONT WARNING LIGHTS
The cab front fascia shall include two (2) Weldon Diamondback V46 LED front warning lights in the
left and right inboard positions. The lights shall feature multiple flash patterns. The lights shall be
mounted to the front fascia of the cab within a chrome bezel.
INBOARD FRONT WARNING LIGHTS COLOR
The warning lights mounted on the cab front fascia in the inboard positions shall be red.