Specifications

The cab front shall include four (4) rectangular halogen headlamps with separate high and low beams
mounted in bright chrome bezels.
FRONT TURN SIGNALS
The front fascia shall include two (2) Whelen model 600 4.00 inch X 6.00 inch programmable LED
amber turn signals which shall be installed in a chrome bezel outboard of the front warning and
headlamps.
HEADLIGHT LOCATION
The headlights shall be located on the front fascia of the cab directly below the front warning lights.
SIDE TURN/MARKER LIGHTS
The sides of the cab shall include two (2) Truck-Lite 10250Y LED round side marker lights which shall
be grommet mounted just behind the front cab radius corners.
MARKER AND ICC LIGHTS
In accordance with FMVSS, there shall be five (5) LED cab marker lamps designating identification,
center and clearance provided. These lights shall be installed on the face of the cab within full view of
other vehicles from ground level.
HEADLIGHT AND MARKER LIGHT ACTIVATION
The headlights and marker lights shall be controlled through a rocker switch within easy reach of the
driver. There shall be a dimmer switch within easy reach of the driver to adjust the brightness of the
dash lights. The headlamps shall be equipped with the "Daytime Running" light feature, which shall
illuminate the headlights to 80% brilliance when the battery master switch is in the "On" position and
the parking brake is released.
GROUND LIGHTS
Each door shall include an LED NFPA compliant ground light mounted to the under side of the cab step
below each door. The lights shall include a polycarbonate lens, a housing which is vibration welded
and LEDs which shall be shock mounted for extended life. The ground lighting shall be activated by the
opening of the respective door as well as being activated when the parking brake is set.
STEP LIGHTS