Specifications

DOOR LOCKS
Each cab entry door shall include a manually operated door lock. Each door lock may be actuated from
the inside of the cab by means of a red knob located on the paddle handle of the respective door or by
using a TriMark key from the exterior. The door locks are designed to prevent accidental lock out.
GRAB HANDLES
The cab shall include one (1) 18.00 inch three-piece knurled aluminum, anti-slip exterior assist handle,
installed behind each cab door. The assist handle shall be made of extruded aluminum with a knurled
finish to enable non-slip assistance with a gloved hand.
REARVIEW MIRRORS
Velvac West Coast style mirrors model 708369 shall be provided and installed on the driver’s and
officer’s doors. The mirrors shall be mounted to the cab doors with tubular stainless steel swing away
arms and the mirror heads shall be center mounted on the arms to provide rigid mounting to reduce
vibration.
The mirror heads shall measure 8.00 inches wide X 16.00 inches high. The flat mirrors shall be heated
and remote controlled with horizontal actuation. The mirror control switches shall be located within
easy reach of the driver. The mirror backs shall be stainless steel complete with amber marker lights.
Manually adjustable convex mirrors shall be provided below the flat mirrors.
REARVIEW MIRROR HEAT SWITCH
The heat for the rearview mirrors shall be controlled through a rocker switch in the mirror control panel
on the left side dash.
CAB FENDER
Full width wheel well liners shall be installed on the extruded cab to limit road splash and enable easier
cleaning. Each two-piece liner shall consist of an inner liner 16.00 inches wide made of vacuum formed
ABS composite and an outer fenderette 3.50 inches wide made of 14 gauge 304 polished stainless steel.
MUD FLAPS FRONT
The front wheel wells shall have mud flaps installed on them.
IGNITION