Operating instructions

-
1
2
-
HORN (Air Horn)
This momentary push-button switch provides a simulated air-horn tone while
pressed. This can be used to either replace, or to supplement the normal vehicle
horn and is useful at intersections or in low noise areas. This tone will override
all other siren tones.
MAN (Manual Function)
With the selector switch in the MAN, A LERT, or HF position, this momentary
push-button switch (MAN) provides a manually activated Wail siren tone. While
the selector switch is in the WAIL, YELP, or PHSR position, this switch provides
a generally quicker changing tone. (See tables below and on next page). These
quicker tones are used to momentarily alert motorists at intersections and very
highly congested areas. Pressing the button once changes to the next faster tone.
Pressing the manual button again, will revert the siren back to the original tone.
Optional configuration allows the replacement of the Phaser tone with Two-
Tone, or the disabling the Phaser tone entirely. These options are selected during
installation and may be governed by State or Local laws. (Refer to the
INSTALLER SELECTABLE OPTIONS section on page 5).
(NOTE: PHASER and TWO-TONE may be optionally swapped or disabled via
program jumpers. See INSTALLER-SELECTABLE OPTIONS on page 5.)
Standard Mode:
Rotary
Switch
Position:
Speakers
1 / 2
Pressing Manual Pushbutton
1 / 2
Phaser Phaser/Phaser Two-Tone/Two-Tone
Yelp Yelp/Yelp Phaser/Phaser
Wail Wail/Wail Yelp/Yelp
Hands
Free
No Output
Creates a manual WAIL tone while
button is being held that sweeps
down when the button is released.
Manual No Output
Creates a manual WAIL tone while
button is being held that sweeps
down when the button is released.
Alert No Output
Creates a manual WAIL tone while
button is being held that stops
immediately when the button is
released.