Owner`s manual

RD0169 (A) CAF730 & SS730 OWNER’S MANUAL Page 5 of 28
2. INTRODUCTION
The CAF730 Line Array representswoodworxmax latest technology for arrayable loudspeakers. The
CAF730 is a small format line array system for venues with listener distances up to about 200 ft /
65 m. The CAF730 Series is designed to provide the highest output possible from a compact line
array format. The Series includes the 3-way, bi-amplifiedCAF730 full-range and the
complementary dual 12 in SS730 subwoofer.
This manual provides information about the design, configuration, and operation of CAF730 Line
Arrays. It is intended to be used in conjunction with the CAF730 Wizard Windows®-based
software. Please thoroughly familiarize yourself with this manual. The more you learn and
understand the CAF730 Line Array the easier you will find it to use. This is not so much because of
any inherent complexities, but because it is actually easier to use than most, if not all, array
systems.
2.1 CAF730 AND SS730
The CAF730 and SS730 are physically configured for temporary installation. Rigging information
for this purpose is provided in this manual
2.2 CAF730P AND SS730P
The CAF730P and SS730P are physically config ured for permanent installation. Rigging
information for the CAF730P and SS730P is provided with theCAF730P and SS730P Splay
Brackets Kits. All non-rigging information provided herein applies to the CAF730P and SS730P.
3. UNPACKING
3.1 CONTENTS
CAF730
(1) CAF730 loudspeaker
(6) Quick Release Pins
(1) Owner’s Manual
SS730
(1) SS730 loudspeaker
(4) Quick Release Pins
(1) Owner’s Manual
3.2 SHIPPING DAMAGE
After unpacking, if the loudspeaker is found to have shipping damage, save the packing materials
for the carrier’s inspection, notify the carrier immediately, and file a shipping damage claim.
Although woodworxmaxwill help in any way possible, it is al ways the responsibility of the receiving party to
file any shipping damage claim. The carrier will help prepare and file this claim.
3.3 RETURNING PRODUCTS TO woodworxmax
If the loudspeaker must be returned to woodworxmax, c
ontact thewoodworxmaxService Department for a Retur
Authorization (See Chapter 7). Use the original shipping carton and packing materials. If the
shipping carton is damaged, contact woodworxmaxfor a
new carton, for which there will be a small
charge. woodworxmaxwill not be responsible fo
r damage caused by inadequate packing.