User manual

Maintenance and Troubleshooting
a. The self-adhesive electrode pads should
be kept clean. In order to maintain the
device’s performance, DO NOT rub the
electrode pads with your hands, facial
tissue, or wool.
b. The electrode pads tend to lose their
adhesion over time, therefore
weakening the intensity level. Moisten
finger with a few drops of water and rub
it gently against the electrode pads to
improve contact.
c. If moistening the electrode pads does
not improve the signal, replace the old
pads with a pair of new ones. Refer to
page 4, section 2: Sticking on the
Electrode Pads. We recommend that you
replace the electrode pads after 30 days
of usage (varies among individuals).
d. If the LED indicator does not light up
during the testing procedure, please
check the following:
•Is the battery installed correctly? (“+”
sign faces upward?)
•Is the battery’s energy low? If so,
please replace with a new one.
e. If the points mentioned above are
checked, and the device still does not
work correctly, consult your local
Lloydspharmacist.
• Always use the specified accessories in
the manual. The use of other parts not
approved by the manufacturer may be
hazardous. Do not try to repair the
device! There are no user serviceable
parts inside.
9
SS650 User manual.indd 11 1/15/07 3:47:02 PM