User manual

Page
48
【Transparency】Choose the background image transparency. The range is 75~255.
【Channel】Choose the set code output channel number.
【Region Cover】Click set button and enter the corresponding channel window. You can cover the
arbitrary using mouse. (Gray region is for output)
【Time display】and 【Channel Title】Set osd position of time title and channel title.
4.4.6 PTZ setup
Picture 4.29 PTZ setup
【Channel】Choose the dome camera input channel.
【Protocol】Choose the corresponding dome protocol. (PELCOD as an example)
【 Address 】 Set as the corresponding dome address. Default: 1. （ Note ： The address must be
consistent with the dome address.）
【Baudrate】Choose the corresponding dome baud rate length. You can control the PTZ and vidicion.
Default: 2400.
【Data bits】Include 5-8 options. Default: 8.
【Stop bits】Include 2 options. Default: 1.
【Parity】Include odd check, even check, sign check, blank check. Default: void.
【Device type】Select “Local” if using 485 to control PTZ.Select “Distance” if using onvif.
4.4.7 Add IPC
Search and add ip cameras to nvr.For more details,refer to chapter3.3.