User manual

Page
45
【Enable】Click Enable,then all settings will be available
【Server IP】IP address for FTP server
【Port】Domain Port of FTP,default 21
【User Name】User name of FTP
【Password】Password of user
【UPNP】UPNP protocol can auto port forwarding on router,make sure UPNP is running on router
before use it.
Picture 4.27
【Enable】Choose Enable to make sure all UPNP settings available
【ARSP】Domain name auto register.
Set your user name,click “Enter(Confirm)” to register ,click to save.If successful,you will get
the domain name : username.edvrddns.com
Make sure the network setup is correct before setting up ARSP.When the ARSP is successfully
configured and start, you can input the domain name in the IE address column to visit.
【Wireless Config】ADSL through usb 3G net card