User manual

Page
44
User Name:Apply the email server user name.
Password:Input the password corresponding to the user.
Sender:Set the email sender address.
Receiver:Send the email to appointed receivers when the alarm is turned on. You can set three
receivers at most.
Snapshot:Enable or disable alarm snapshot.
【DDNS】
It is the abbreviation of dynamic domain name server.
DDNS Type:choose ddns service provider.
User name：Provide the account registered by DDNS.
Password：Provide the password registered by DDNS.
When the DDNS is successfully configured and start, you can connect the domain name in the IE
address column to visit.
Domain name：Provide the domain name registered by DDNS.
Note：The DNS setup must be configured correctly in the network setup.
Picture 4.23 DDNS setup
【FTP setup】FTP is available only when alarm happens,or alarm activates record and snapshot,it will
upload related snapshot pictures to FTP server.
Picture 4.24 FTP setup