User manual

Page
41
narrowband state, especially used in mobile monitor.
4.4.3 Network setup
Picture4.17 Network
【Net Card】You can choose cable network card or wireless network card.
【DHCP Enable】Obtain IP address automatically(not suggested)
Note：DHCP server is preinstalled.
【IP address】Set the IP address. Default: 192.168.0.10.
【Subnet mask】Set the subnet mask code. Default: 255.255.255.0.
【Gateway】Set the default gateway. Default: 192.168.0.1.
【DNS setup】Domain Name Server. It translates the domain name into IP address. The IP address
is offered by network provider. The address must be set and reboot then it works.
【HTTP port】Default: 80.
【Command port】Default port:6001
【TCP port】Default: 6002.
【Mobile Monitor port】Default：6003
【P2P】Enable or disable p2p function.