User manual

Page

4.4.2 Encode setup

Set the video/audio code parameter: video file, remote monitoring and so on. Set every independent

channel’s coding parameter in the left part, and set the combine encode parameter in the right part.

Note: Combine encode introduces video compression technique which combines and compresses

multi-channel’s video to a special channel.Applying for multi-channel playback simultaneously, Dial-up

multi-channel real-time monitor, mobile monitor and so on.

Picture 4.16 Encode setup

【CAM】Choose the channel number.

【Compression】Standard H.264 main profile.

【Resolution】Show resolution of connected ipc:1080P/960P/720P/D1/ HD1/CIF / QCIF.

【Frame Rate】P:1 frame/s~25 frame/s; N: 1 frame/s~30 frame/s

【Bit Rate】Set the code stream value to modify the image quality. The larger code stream value the

better image quality.

D1（1000~1500kbps）,CIF（384~1500kbps）, QCIF(64~512kbps)

【Video/Audio】When the icons are all selected, the video file is video and audio multiplex stream.

Combine Enable

【Combine Enable】When the icons are all checked, opening combination coding functions.

【 Mode 】 multi-channel playback is used in all channels playback simultaneously, and the

narrowband transmission is used in multi-channel real-time remote monitoring simultaneously at