User manual

Page
38
4.3.4 Alarm input
When the equipment obtains the external alarm signal, the alarm function is turned on.
Picture 4.11 Alarm input
Set method: refer to chapter 4.3.1. Motion detect
4.3.5 Abnormal
Analysing and inspecting current software and hardware of the device: When some abnormal events
happen,the device will make a relative answer such as show message and buzzer.
Picture 4.12 Abnormal
【Event Type】 selecting abnormity you want to inspect
【Enable】 Select to make sure abnormal function workable
【Show message】 Automatically alarm cue shows on the main screen
【Buzzer】 Device will have two long nosie “di di” while alarm is happening