User manual

Page
35
【CAM】Choose the set motion detect channel.
【Enable】 means that the motion detect function is on.
【Sensitivity】Choose in the six options according to the sensitivity.
【 Region 】 Click setup and enter the set area. The area is divided into PAL22X18.. Yellow block
means the dynamic detect defensive area. Black block means the unfenced area. You can set the
area as followed, Drag the mouse and draw the area.
Picture 4.5 Region
【Period】Trigger the motion detect signal in the set time section. Click the left key of mouse or drag
on the time blocks to select period .Yellow means the set valid.
Picture 4.6 set the time section
【Alarm output】Start the external equipment of corresponding linkage alarm when the motion detect