User manual

Page
32
Shut down
Logout/shutdo
wn/reboot
Logout, shut down or reboot
Entertainm
ent
Game Tetris
4.2 Record
4.2.1 Record Config
Set the recording parameters in the surveillance channel. The system is set 24 hours consecutive
recording in the first startup. You can enter [main menu]> [record mode] to set.
Picture 4.1 Record Config
【CAM】Choose the corresponding channel number to set the channel. Choose the all option to set
the entire channels.
【PreRecord】Record 1-30 seconds before the action. (time length is decided by the code stream)
【Mode】Set video state: general，detect，alarm，event，stop.
General:Perform the regular recording in the set time section.
Detect:Trigger the “motion detect”, “camera mask” or “video loss” signal. When above
alarm is set as opening recording, the “detection recording” state is on.
Alarm:Trigger the external alarm signal in the set time section. When above alarm is set as
opening recording, the “detection recording” state is on.