Specifications

39
※ Popup Window
Setup at {Menu}  {Setup}  {System}  {7. Alarm}.
Popup Window is to pop up the system check window in the
monitoring screen as shown. it indicates [Video Signal loss/
HDD full/ HDD Not Detect / FAN fail/ Storage Fail/ Storage
Warning / Sensor Connection Tamper].
(9) Alarm Duration
① It sets the duration of the alarm triggered by the recording and system event.
② Move to {Menu}  {Setup}  {System}  {8. Alarm Duration}.
③ In the selection window, set Alarm Duration by using the arrow keys and the Select button.
(10) Menu Time Out
If no input is made in the System Setup menu from the remote controller and mouse, the system
automatically shifts to the real-time monitoring mode.
① Move to {Menu}  {Setup}  {System}  {9. Menu time Out}.
② In the selection window, select the time zone you want to set by using the arrow keys and t
he select button.
Off
The Automatic Menu Exit is not used.
※ The user can exit the menu by pressing the [ESC] button in the System
menu.
1/2/3 MIN
If there is no input from the remote controller, or mouse, the system will shift to
the real-time monitoring mode.
User Setting
The user can enter the time directly.
※ The time can be set to 1 ~ 60 minutes.
③ Selecting the User Setting causes the input window to appear.
④ Enter the time by using the numeric buttons or the arrow keys and the Select button.
(11) Language
This feature is used to select the language for the On Screen Display (OSD) menu of the system. 18
languages are supported.