Specifications

① Firmware Upgrade

① Select {Firmware} and the upgrade file list stored in the selected device and simple version i

nfo of the selected file are then displayed. Select a file and Firmware Upgrade window appe

ars.

※ Downgrading to a previous version is not supported.

※ The upgrade information window will then appear within 15 seconds.

② Read the information and select {Yes} to start the upgrade gradually. Select {No} to return to

the {System} mode.

③ After the upgrade is completed, the system reboots.

④ Move to {Menu}  {Miscellaneous}  {NVR Information}  {2. Software Version} to check t

he version.

(5) Setup Upgrade

① Select {Setup} and the upgrade file list stored in the selected device and simple version info

of the selected file are then displayed.

② Select a file and then the upgrade starts immediately.

Select a file and then the upgrade starts immediately. All setting values of the current

menu will be changed to the upgrade setting values.

(6) Factory Default

① Move to {Menu}  {Setup}  {System}  {5. Factory Setup}.

② Select {Yes} when Initialization (Yes/No) Window appears.

Note that all setting data will be initialized.

※ All values go back to Factory Default Value.

(7) Console / POS Port

① Move to {Menu}  {Setup}  {System}  {6. Console / POS Port}.

② On the selection window, select the device by using the arrow keys and the Select button.

(8) Alarm

Alarm is to notify system incidents [Video Signal loss/ HDD full/ FAN fail/ HDD fail/ HDD warning] through

[Buzzer/ E-mail/ Relay01/ System check].

Select each [Off/Buzzer/E-mail/Relay01/Popup Window] by ticking.