Specifications

(1) NVR Name

. The initial value is the Mac address. (It supports up to 20 letters for the system name.)

(2) ID For Keyboard Controller

① Move to {Menu}  {Setup}  {System}  {2. ID for Key Controller}.

② In the selection window, enter ID by using the arrow keys and the Select button (number 1~

255 is available for ID.)

(3) User Registration

※ Add, edit, or delete the users who will operate the system and give authorities to users as shown below.

System Access Authorization

Network Live View the real-time images upon network access.

Playback View the recorded images.

Copy (download) Copy and download files.

PTZ camera PTZ camera control

Setup

Recording, schedule, system, storage, Time, PTZ,

network, Screen setup

Network Upgrade Remote network upgrade

Covert channel monitoring View the covert channel in the network.

(4) Upgrade

The firmware and menu setting of the product can be easily upgraded through the use of the external

storage devices or portable storage devices with USB 2.0 port.

※ Find and copy the upgrade file to the highest folder in the external storage device or portable storage

device supporting USB 2.0.

※ Connect the storage device with the upgrade file stored in USB 2.0 port at front panel.

1) After copying the upgrade file, be advised to get rid of the USB device with

safety removal mode from PC.

2) If the USB device is disconnected from the USB port while the upgrade file

is being copied, the NVR system may not automatically detect the file.

Removing USB during the upgrade in progress may cause damage on the

system.

The system starts over when the upgrade is completed.

Up to 15 users can be registered. Letters for ID and Password can be entered up

to 30.