Specifications

11
After an IP Camera is found, the IP Cameras “Port, ID, password, protocol” can be inputted. Please take careful
note that if there is any mistake or ‘typo’ in any of the 4 Settings (Port, ID, PW, Protocol), then connection will not
be possible
４-４ POE Connection
① Connect the PoE Power adaptor on NVR to turn on PoE.
② Input PoE IP camera to the PoE Port on NVR. 4PoE NVR support PoE from channel 1 to channel4
and the other 12 channels can be connected to the IP cameras connected into the same network.8
PoE NVR supports PoE from channel 1 to channel8 and the other 8 channels can be connected to
the IP cameras connected into the same network.
③ PoE channels (from 1 to 4 or 8) should be registered from 10.34.46.55 to 10.34.46.58 or 62 manuall
y.
④ Once PoE cameras are recognized by NVR, you can see the Register window as below.
⑤ Press Register button then NVR will try to connect PoE IP cameras then it will be connected after fe
w minutes.
４-５ Monitoring
NVR Model Series features powerful monitoring functions as shown below.