Specifications

Chapter ４. NVR Operation Setup

４-１

Power ON.

① Check the adapter, and connect the power.

② Once Power cable is connected (found in Rear Side), booting will be enabled.

③ After booting is finished, the live screen and channel indication / clock are shown.

④ Menu window pops up by clicking the right button of the mouse as shown below.

ID and Password are required for initial installation.

Default ID and Password are [ admin : 00000 ]

４-２

For security purpose, user must log in first to use {Monitoring Menu}.

After logging out, the user cannot use {Menu}.

４-３

IP Camera Add & Delete

{Menu} – {Setup} – {Camera}

By using the ‘Search’ Button, the NVR can search for IP Cameras within the same ‘network’.