User Manual

SF-10
01 02
Basic Information
Please read this manual carefully before operating the equipment. Follow all safety instructions and
warnings contained in this manual.
Warnings and Precautions
OPTICAL FIBER CLEAVER
Electric precision
Accessories list: Host :1 set/Miller stripper :1 piece /alcohol bottle :1 set/Instruction :1 copy/
Type-C charging cable :1 set
Warning: If this document is ignored, it may cause personal injury or damage to the equipment due to improper use.
Safety glasses should always be worn during fiber preparation and cutting. If fiber fragments come into contact with
the skin or eyes, there is a risk of personal injury.
Attention:
1.Do not disassemble or modify the fiber cleaver.
2.The fiber cleaver is designed for cutting glass fibers used in communications, do not attempt to cut any other material.
3.The cutting blade is very sharp, please do not touch it, otherwise it may cause personal injury.
4.Never expose the fiber cleaver to rain or moisture.
SF-10
OPTICAL FIBER CLEAVER
Electric precision
Bluetooth for wireless communication
The SF-10 carries out wireless communication through 2.4g Bluetooth, and the Bluetooth is automatically
turned on when starting
Fiber type
Cut length
Cutting Angle
Bare machine size
Bare-metal weight
charging voltage
Working environment
single-mode/multi-mode fiber: Diameter: 80um-220um (rubber-covered wire, tail fiber, fiber optic cable)
Bare fiber: 3-25mm/rubber-covered wire& tail fiber: 10-25mm
Mean < 0.5°
122mmX87mmX67mm
630g
DC5V/2A
Temperature: -10 to 40℃ / humidity: 0 to 95%