User Manual

13 14
Replacement of blade Blade clean
SF-10
Maintenance
Maintenance
OPTICAL FIBER CLEAVER
Electric precision
SF-10
OPTICAL FIBER CLEAVER
Electric precision
1. Turn off the power of the cleaver and
remove the blade cover: use first
Remove the screw at the position ① ②
with a screwdriver, and then lift it up
Open the lid above the cleaver.
2. Change the blade: remove the blade
screw ③ with a screwdriver, and
Replace with a new blade and click
"Next" after the replacement is complete.
Note: When removing the blade screws,
you need to fix the blade.
Prevent rotation. The blade is sharp,
please take care to avoid
Injured.
3. Install the cover and install the
screws ① ②.