User's Manual

Tele Eye
RX
User
Guide Page 78
Main Menu
Main Menu

 Setup

Video

Local Monitoring
The local monitoring menu contains the following options
CLOCK POSITION : Change the clock position (Bottom, Top or None)
in local CCTV monitor
CAMERA NAME POSITION : Change the camera name position (Bottom, Top or
None) in local CCTV monitor (Camera name and
clock positions are in opposite position)
SEQUENTIAL SWITCH TIME
: Change the switch time between each live camera
display for sequential mode monitoring
SEQUENTIAL MODE CAMERAS : Select cameras for sequential mode monitoring
DEFAULT DISPLAY MODE : Select default display mode in CCTV monitor
after
Tele
Eye RX transmitter boot up
HORIZONTAL POSITION : Change horizontal position of local video output
VERTICAL POSITION : Change vertical position of local video output
HORIZONTAL SCALE : Change horizontal scale of local video output
VERTICAL SCALE : Change vertical scale of local video output
For [HORIZONTAL POSITION], [VERTICAL POSITON], [HORIZONTAL SCALE]
and [VERTICAL SCALE] options, user can change these options if live video position or
size display does not fit in the local CCTV monitor.
LOCAL MONITORING
CLOCK POSITION BOTTOM
CAMERA NAME POSITION TOP
SEQUENTIAL SWITCH TIME 1SEC
SEQUENTIAL MODE CAMERAS 1-3-
DEFAULT DISPLAY MODE QUAD
HORIZONTAL POSITION 5
VERTICAL POSITION 0
HORIZONTAL SCALE 10
VERTICAL SCALE 2