User's Manual

Tele

Eye RX User

Guide Page 1

Introduction

INTRODUCTION

A. Introduction

Tele

Eye RX Series Video Recording Transmitter operates with its revolutionary multi-

rate video coder to fulfill the highest video coding requirements for simultaneous transmission

and recording. Seamless video transmission by

Tele

Eye RX can be performed in low and

medium bandwidth communication networks including ADSL, ISDN and PSTN; whilst DVD-

quality videos can be transmitted through LAN and recorded into local hard drive with optimum

speed at 25fps and resolution in 720x576 pixels. Real time recording of up to 100/120fps on all

video channels can also be achieved at CIF resolution.

Tele

Eye RX provides professional and real life security control of premises with its

sophisticated event management scheme. It responses to wide range of events triggered by

external alarm sensor, video motion, power interruption and tamper. There is an arm/disarm

control for the event management mechanism. Every external alarm input is configurable with

an individual entry/exit delay, fire zone and tamper detection setting. Various actions like

sending video back to a designated receiving PC, video recording, email notification, etc.

Tele

Eye RX can also keep a comprehensive log of the events for audit trail.

Tele

Eye RX is designed to fully comply with the British Standard BS 8418:2003,

providing professional remote monitoring and visual alarm verification solution to central

monitoring station.

With a built-in CD-writer, video footage stored inside

Tele

Eye RX can be easily extracted

for evidential purposes. Recorded video can be backed up in CD and played back in any PC

without any special software.

SECTION