User's Manual
Tele
Eye
RX
User
Guide Page 63
Setup
Tele
Eye RX for Modem Connection
Assign modem baud rate in order to adjust
modem connection speed.
Assign ring count, so modem can connect to the
transmitter after that ring count.
Press [Apply] icon to save the
network setting and pop up the message board.
After several seconds, the transmitter will restart
automatically.
Step 12 : If user setup modem connection by using local CCTV monitor (Step 11a), please
install the modem for your PC and connect to the telephone network in order to
connect to
Tele
Eye
RX
transmitter
In Windows 2000/XP desktop, select Start >
Control Panel
Double click Add Hardware, press Next, to
search the modem connected to the PC
automatically
Windows 2000/XP can search the modem device
automatically. If modem installation has problem,
please refers to the modem manual.