User's Manual

Tele Eye
RX
User
Guide Page 62
Setup
Tele Eye RX for Modem Connection
 Press [Connect] icon to pop up the
[Connect Window]. For example, type and select
the following setting :
Phone/IP :
29955992 (Phone number of the transmitter)
Connect Using :
U.S. Robotics 56K Voice EXT PnP
(Modem Driver)
Password: 000000
 Press [Connect] icon to connect your
PC and the transmitter. The video appears on the
WX-30 if success. Otherwise, the [Warning]
board will pop up and show you failure message.
For failure case, please press [Connect]
icon
to check that the connection setting is valid or not.
 Press [Transmitter setup] icon to show
Tele
Eye RX
configuration menu.

Select [Connection] and press [Modem Settings]
icon to configure network setting.