User's Manual

Tele Eye
RX
User
Guide Page 52
Setup
Tele
Eye RX for Broadband or Narrowband
Internet Connection with Dynamic IP

Choose [Transmitter] 

 [Registration] to
register the
Tele
Eye RX transmitter. User
needs to input transmitter serial number and
registration code.
For example :
Serial No. : VTC12345
Registration Code : 1234567890
 Press [Connect] icon to pop up the
[Connect Window]. Type and select the
following setting :
Broadband Connection :
Phone/IP : 192.168.0.2
Connect Using: TCP/IP Broadband
Password: 000000
OR
Narrowband Connection :
Phone/IP : 192.168.0.2
Connect Using: TCP/IP Narrowband
Password: 000000
IP (192.168.0.2) and Password (000000)
are default setting of
Tele
Eye RX

Press [Connect] icon to
connect your PC and the transmitter. The
video appears on the WX-30 if success.
Otherwise, the [Warning] board will pop
up and show you failure message. For
failure case, please press [Connect]
icon to check that the connection setting is
valid or not.