User's Manual

Tele Eye
RX
User
Guide Page 49
Setup
Tele
Eye RX for Broadband or Narrowband
Internet Connection with Dynamic IP
 Select [SURELINK] option from TCP/IP
menu and press “Enter”
button to
enter the sub menu.

Select [ENABLED] option and press
“Left”
or “Right” button to
set
[YES]
value
 Select [SURELINK ADDRESS] option
and press “Enter”
button to
sure
LINK editing menu.
There are two fields for assigning sureLINK
address
“www.
your_site
.
your_company
.teleeye.net”
(Refer P.152 to section of getting sure
LINK
address)
 Use “Up” or “Down” or “Left” or “Right”
button to select values and use “Enter”
button to assign value.

[BACK]
 back to previous value or field

[NEXT] next to field

[CLEAR]  clear field
 [END]  finish to assign sureLINK
address and exit the editing menu.
 Press “Live” button and [SETTING
MODIFIED] message board will pop up.
Press “Enter”
button to restart the
transmitter.
SURELIN
K
ENABLED YES
SURELINK ADDRESS www…..
REFRESH RATE 1 MINS
SURELINK ADDRESS
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z BACK NEXT
CLEAR END
WWW. _ . TELEEYE.NET
SETTING MODIFIED
SETTING WILL TAKE EFFECT
AFTER RESTART ,
PRESS ENTER TO CONTINUE
OK